P-DUKE电源模块

POWER MATE TECHNOLOGY FDC05 (W)-SERIES
OUTPUT SPECIFICATIONS
Output power 5 Watts max
Voltage accuracy Full load and nominal Vin ± 1%
Minimum load 0%
Line regulation LL to HL at Full Load ± 0.2%
Load regulation No load to Full load Single
Dual
± 0.2%
± 1%
Cross regulation (Dual) Asymmetrical load 25% / ** FL ± 5%
Ripple and noise 20MHz bandwidth See table
Temperature coefficient ±0.02% / oC, max
Transient response
recovery time
25% load step change
FL to 1/2 FL ±1% error band
Single 200μS
Dual 200μS
Over load protection % of FL at nominal input 170% typ
Short circuit protection Continuous, automatics recovery
GENERAL SPECIFICATIONS
Efficiency See table
Isolation Voltage Input to Output to Case 1600VDC, min
Isolation resistance 109ohms, min
Isolation capacitance 300pF, max
Switching frequency Standard
“W” series
300KHz, typ
200KHz, typ
Approvals and standard IEC60950-1, UL60950-1, EN60950-1
Case material Nickel-coated copper
Base material Non-conducted black plastic
Potting material Epoxy (UL94-V0)
Dimensions 2.00 X 1.00 X 0.40 Inch
(50.8 X 25.4 X 10.2 mm)
Weight 27g (0.95oz)
MTBF (Note 1) BELLCORE TR-NWT-000332
MIL-HDBK-217F
3.145 x 106 hrs
2.326 x 106 hrs
INPUT SPECIFICATIONS
Input voltage range
FDC05
FDC05-W
12V nominal input
24V nominal input
48V nominal input
24V nominal input
48V nominal input
9 – 18VDC
18 – 36VDC
36 – 75VDC
9 – 36VDC
18 – 75VDC
Input filter Pi type
Input surge voltage 100mS max
12V input
24V input
48V input
36VDC
50VDC
100VDC
Input reflected ripple current Nominal Vin and full load 20mAp-p
Start up time Nominal Vin and
Constant resistive load Power up 450mS max
Remote ON/OFF (Option) (Note 6)
(Positive logic)
(Negative logic)
DC-DC ON
DC-DC OFF
DC-DC ON
DC-DC OFF
Open or 3.5V < Vr < 12V
Short or 0V < Vr < 1.2V
Short or 0V < Vr < 1.2V
Open or 3.5V < Vr < 12V
Input current of remote control pin Nominal Vin -0.5mA ~ +1mA
Remote off state input current Nominal Vin 2.5mA
ENVIRONMENTAL SPECIFICATIONS
Operating temperature
range
(Reference derating curve)
Standard
M1 (Note 7)
M2 (W series)
-25oC ~ +85oC (with derating)
-40oC ~ +85oC (non-derating)
-40oC ~ +85oC (with derating)
Maximum case temperature +100oC
Storage temperature range -55oC ~ +105oC
Thermal impedance (Note 8)Nature convection
Nature convection with heat-sink
12oC/watt
10oC/watt
Thermal shock MIL-STD-810F
Vibration MIL-STD-810F
Relative humidity 5% to 95% RH
EMC CHARACTERISTICS
EMI EN55022 Class A
ESD EN61000-4-2 Air
Contact
± 8KV
± 6KV Perf. Criteria B
Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A
Fast transient EN61000-4-4 ± 2KV Perf. Criteria B
Surge (Note 9) EN61000-4-5 ± 1KV Perf. Criteria B
Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A
POWER MATE TECHNOLOGY FDC05 (W)-SERIES
Model
Number
Input
Range
Output
Voltage
Output Current
Output (4)
Ripple & Noise
Input Current
Eff (4)
(%)
Capacitor
Min. load Full load No load (3) Full load (2) Load max(5)
FDC05-12S33 9 – 18 VDC 3.3 VDC 0mA 1000mA 50mVp-p 10mA 382mA 76 3700μF
FDC05-12S05 9 – 18 VDC 5 VDC 0mA 1000mA 50mVp-p 10mA 556mA 79 1700μF
FDC05-12S12 9 – 18 VDC 12 VDC 0mA 470mA 50mVp-p 10mA 610mA 81 290μF
FDC05-12S15 9 – 18 VDC 15 VDC 0mA 400mA 50mVp-p 15mA 658mA 80 188μF
FDC05-12D05 9 – 18 VDC ± 5 VDC 0mA ± 500mA 50mVp-p 20mA 556mA 79 ± 850μF
FDC05-12D12 9 – 18 VDC ± 12 VDC 0mA ± 230mA 50mVp-p 15mA 597mA 81 ± 140μF
FDC05-12D15 9 – 18 VDC ± 15 VDC 0mA ± 190mA 50mVp-p 20mA 609mA 82 ± 47μF
FDC05-24S33 (W) 18 – 36 (9 – 36) VDC 3.3 VDC 0mA 1000mA 50mVp-p 15(5mA) 199 (188mA) 73 (77) 3700μF
FDC05-24S05 (W) 18 – 36 (9 – 36) VDC 5 VDC 0mA 1000mA 50mVp-p 15(5mA) 282 (274mA) 78 (80) 1700μF
FDC05-24S12 (W) 18 – 36 (9 – 36) VDC 12 VDC 0mA 470mA 50mVp-p 10(5mA) 305 (301mA) 81 (82) 290μF
FDC05-24S15 (W) 18 – 36 (9 – 36) VDC 15 VDC 0mA 400mA 50mVp-p 20(5mA) 325 (325mA) 81 (81) 188μF
FDC05-24D05 (W) 18 – 36 (9 – 36) VDC ± 5 VDC 0mA ± 500mA 50mVp-p 15(5mA) 278 (274mA) 79 (80) ± 850μF
FDC05-24D12 (W) 18 – 36 (9 – 36) VDC ± 12 VDC 0mA ± 230mA 50mVp-p 20(5mA) 295 (295mA) 82 (82) ± 140μF
FDC05-24D15 (W) 18 – 36 (9 – 36) VDC ± 15 VDC 0mA ± 190mA 50mVp-p 20(10mA) 308 (301mA) 81 (83) ± 47μF
FDC05-48S33 (W) 36 – 75 (18 – 75) VDC 3.3 VDC 0mA 1000mA 50mVp-p 5(5mA) 100 (100mA) 73 (73) 3700μF
FDC05-48S05 (W) 36 – 75 (18 – 75) VDC 5 VDC 0mA 1000mA 50mVp-p 10(10mA) 145 (145mA) 76 (76) 1700μF
FDC05-48S12 (W) 36 – 75 (18 – 75) VDC 12 VDC 0mA 470mA 50mVp-p 10(10mA) 151 (151mA) 82 (82) 290μF
FDC05-48S15 (W) 36 – 75 (18 – 75) VDC 15 VDC 0mA 400mA 50mVp-p 10(10mA) 160 (163mA) 82 (81) 188μF
FDC05-48D05 (W) 36 – 75 (18 – 75) VDC ± 5 VDC 0mA ± 500mA 50mVp-p 10(5mA) 141 (141mA) 78 (78) ± 850μF
FDC05-48D12 (W) 36 – 75 (18 – 75) VDC ± 12 VDC 0mA ± 230mA 50mVp-p 10(10mA) 149 (149mA) 81 (81) ± 140μF
FDC05-48D15 (W) 36 – 75 (18 – 75) VDC ± 15 VDC 0mA ± 190mA 50mVp-p 10(10mA) 154 (154mA) 81 (81) ± 47μF